Brookfield Industries Logo

Leading US Manufacturer of
Heavy Duty Hinges & Door Operators

Request Quote
Request Information
    Model numbers I8505-I8508 are designed and tested to support thrust loads or doors weighing up to 800 pounds. For those detention grade applications, they meet or exceed ASTM F1758 Grade 1 and are FBOP approved. Features: self-lubricating maintenance free radial and thrust plain bearings which have PV ratings as high as 28000 psi x fpm, a precision-ground stainless-steel maximum- security hinge pin welded in place.

    Note: for doors specified with closers or handicap access, we recommend moving up to I8510-I8513 because of lower Operating Torque, regardless of door weight.
Unit of Measure

Mounting Style

 N/A Gap Mounted (closed position, opens 180° minimum), Non Handed

Hinge Size

 N/A 5 in. high x 6 in. wide

Base Material

 N/A 1018 Cold Rolled Steel ASTM A108

Hinge Pin

 N/A Aircraft quality, Hardened Alloy Steel, Armoloy coated

Finish

 N/A 600 USP Prime

Mounting Holes

 N/A NA

Bearing Type

 N/A Plain: thrust and radial, self-lubricating, PV=28,000 psi-fpm

Thrust Capacity (Door Weight)

 N/A 800 lb

Radial Capacity

 N/A 320 lb

Operating Torque (Frictional)

 N/A 50 lb-in (Theoretical value at full capacity. Actual value will depend on installation variables.)

Welding Requirements

 N/A 1/4 in. fillet weld 3 sides, full length (top, bottom, vertical)
Do not weld on backside adjacent barrel. Assure weld interpass temperature near barrel does not exceed 225 deg. F

Base Material (Optional)

 N/A 304 Stainless Steel ASTM A276

Hinge Weight (approx.)

 N/A 7 lb

Finish (Optional)

 N/A 603 (US2G) – Zinc Clear Steel 626 (US26D) – Satin Chrome Steel 630 (US32D) – Buffed Satin Stainless Steel

Custom (Typical)

 N/A Hinge leaf widths: single or double cut

N/A Series i-8500 hinges will function at the rated capacities providing the following specification is met:

1. The hinges are installed without inducing "hinge bind".

2. A minimum of 2 hinges (1 pair) are used per door.

3. Door weight or thrust load shall never exceed the thrust capacity of one hinge.

4. Compliance with bolting specification.

5. Minimum thread engagement into reinforcing member shall be equal to bolt diameter.

6. For weld on applications, the minimum fillet weld size shall be 1/4", and be full length on the top, bottom, and vertical edges of the mounting surface of each hinge leaf. There shall be no welding on the backside, adjacent to the hinge barrel. Assure the weld interpass temperature at the hinge barrel does not exceed 225 deg. F.

7. For certain high frequency applications, adequate load distribution between hinges maybe necessary to obtain the highest margin of safety with respect to load-life on bearings.

Brookfield Industries Logo Reverse

Brookfield Industries, Inc. is the original manufacturer of specialty products for the heavy commercial/industrial door market. We specialize in heavy duty automatic door operating systems and precision engineered heavy duty high capacity hinges. They are used for cancer treatment, industrial radiation, nuclear, petrochemical, security, acoustical, EMI/RF, and heavy architectural applications.

Made In USA

Brookfield Industries, Inc.
99 West Hillside Ave.
Thomaston, CT 06787
P: 860-283-6211

Products

Company